| |
RAPCO PRODUCT LIST
|
To view or print the Product
Catalogue you will require a copy of
Adobe Acrobat Reader version 5.0 or higher installed on your
machine.
If you do not have a copy of Acrobat reader, you may download it free
of charge,
from the Adobe Web Site. |
|
To download the latest version of
Adobe®
Acrobat® Reader
|
 |
|
1804 Series - 1804L25, 1804L26
GPS Precision Time & Frequency sources
Click here for
datasheet of typical 1804
variant
 | USES SIGNALS FROM THE GPS SATELLITE
CONSTELLATION AVAILABLE WORLDWIDE. |
| VOLTAGE-CONTROLLED QUARTZ OR RUBIDIUM
OSCILLATOR CONSTANTLY DRIFT-CORRECTED WITH RESPECT TO THE GPS
TRANSMISSION. |
| VERY-LONG-TERM ACCURACY OF THE OUTPUT
APPROACHES THAT OF THE SATELLITES' ATOMIC REFERENCE OSCILLATORS. |
| UNITS DO NOT REQUIRE CALIBRATION OF
INTERNAL OSCILLATORS IN ORDER TO MAINTAIN FULL PERFORMANCE. |
| RELATIONSHIP BETWEEN 1Hz TIMING OUTPUT
AND UTC IS MAINTAINED SO THAT PRECISE RELATIVE TIMING CAN BE ACHIEVED
BETWEEN DISTANT INSTALLATIONS. |
Designed and manufactured under
strict quality control conditions, the 1804 can be used with confidence as a
frequency reference for both analogue and digital T.V. & radio transmission,
in Cellular networks and for Telecommunications timing. Other applications
include military communication systems, satellite ground stations and
calibration-laboratory systems, particularly in connection with the development
and manufacture of high-technology products. With over 1,400 installations
worldwide, the 1804, now in its third-generation, continues to offer an
unmatched combination of accuracy, functionality and reliability.
PRODUCT IDENTIFICATION
Products in this family are divided into two main
groups, which are:
1804L25xxx - Quartz referenced units
1804L26xxx - Rubidium referenced units
The 1804 is available with a wide range of options;
identified by a two or three-character suffix in the type number [xxx in the above
examples]
The 1804L25E8A has become virtually an industry standard for numerous
broadcast applications, In particular it has been successful for Digital
Audio Broadcast (DAB) and Digital Video Broadcast (DVB) in Single
Frequency Networks where the control of both Frequency and Timing is
crucial.
The Rubidium-reference 1804L26xxx versions offer
exceptional accuracy for calibration-standard work or as a Master clock for
satellite control centres or Telecommunications Timing. The 'stand-alone'
accuracy of the reference oscillator is more than two orders-of-magnitude higher
than a Quartz-referenced unit.
Options: see list.
1814 series -- 1814B Click here for
datasheet of typical
1814
variant
GPS synchronised precision time sources.
A lower-cost 'Timing-only' variant of the 1804 series.
| APPLICATIONS WHERE TIMING SIGNALS ARE
THE ONLY REQUIREMENT AND WHERE RF FREQUENCY REFERENCE OUTPUTS ARE NOT
NEEDED. |
| LOWER COST THAN THE 1804. |
| GPS-REFERENCED UTC TIMING SIGNAL OF HIGH
ACCURACY, WITH OUTPUT INTERFACES THAT ARE APPROPRIATE FOR TIMING
APPLICATIONS. |
PRODUCT IDENTIFICATION
Products in this series are divided into two main groups, which are:
1814Bxx are Quartz-referenced units
1814Cxx are Rubidium-referenced units
The 1814 is available with some optional features;
although these are restricted to those that are relevant to Timing
applications. Individual variants are identified by a two-character suffix
in the type number [xx in the above examples]. In this 'Timing-only'
group, the 1814B1 is the baseline product, which is equipped with a simple
TCXO 'keep-alive' reference oscillator, although with Timing from the GPS,
accuracy remains similar to that of the 1804.
A full-function RS232 control & monitoring port is
standard, with protocols similar to those of the 1804. User-programmable
Timecode is also standard (IRIG-A, or IRIG-B, or XR3, or 2137 may be
selected)
Options: see list.
2804 Series GPS MASTER CLOCK
Rapco 2804 Series
High-specification GPS Master
Clock
Click here
for datasheet of typical 2804 unit
| THE DEFINITIVE TIMING SOLUTION FOR SATELLITE
GROUND-STATION AND SIMILAR ADVANCED TELECOMMUNICATIONS APPLICATIONS. |
| MORE FUNCTIONALITY FOR RACK SPACE SAVING AND
COST EFFECTIVENESS. |
| FROM GPS RECEIVER TO TIME DISPLAY OUTPUTS IN
ONE BOX. |
These units have a high-quality Vacuum Fluorescent
alphanumeric front-panel display, more manual control features and
extensive built-in-test (BIT) facilities. State-of-the-art reference
oscillators in both Quartz and Rubidium versions, offer improved stability
and accuracy compared with earlier generation products along with higher
levels of stand-alone stability during hold-over.
A fully-featured System Master-clock with Time and Frequency Outputs
19" Rack-Mount x 1U Height -- AC Powered -- DC Support
Standard Features: as 1804 series, PLUS
80-character VFD high quality front-panel Display.
Front-panel data-entry/control
buttons.
Powerful Built-in-Test [BIT] system.
Premium-quality SC-Quartz OCXO / Low
Phase-Noise,
Low Ageing, Fast warm-up.
High-performance Rubidium option.
Timecode output: XR3 or 2137 or IRIG
A or IRIG B.
Remote-Display RS422 drive port.
Portable
Precision from Rapco
7370 |
|
|
The Rapco 7370 Portable
Calibration Unit gives precise frequency and time signals in all
situations where conventional laboratory instrumentation cannot be
used. |
|
The main features of the unit are as follows
:
|
 |
Battery
powered for ‘go anywhere’
use. |
|
|
Retains
accurate time and frequency during long periods of field use due
to calibration via GPS and high quality internal oscillator. |
|
|
Low power
consumption for long battery life between recharges. |
|
|
Unique
oscillator attitude sensing and compensation for optimal frequency
stability. |
|
|
Fully
automatic battery recharging and oscillator calibration overnight
or while travelling (via in-car charger and roof top GPS antenna
(both supplied)). |
|
|
LED and
audible warning of low batteries or approaching calibration limit
so all use is within guaranteed levels. |
|
|
Rugged
design and construction for use in all industries and
environments. |
|
|
The 7370 is just one of a family of portable Rapco
units designed for military or other demanding applications.
If you
need a unit similar to that described above please contact us to discuss
your requirements.
View Full
7370 Product
Specification in pdf Format
(File
size 64KB)
800 series
800 series cases are suitable for rack-mounting or bench-top installation.
Because they are independent of
external dc power supplies, and are fitted with
a safe IEC ac power connector, individual modules can also
be used in isolation
on a shelf or bench top, or retrofitted into small available spaces in existing
system racks.
| LARGE NUMBER OF USEFUL SPECIAL FUNCTIONS
THAT MAY BE APPLIED IN BOTH LARGE-SCALE SYSTEMS, OR IN SMALL
SUB-SYSTEMS. |
| MODULES INDIVIDUALLY AC POWERED. |
| FREE STANDING OR 19-INCH RACK-MOUNT WITH
FOUR UNITS IN EACH 3U HIGH SUB-RACK. |
Modular precision frequency reference system for use in Calibration
Laboratories.
Rack-Mount Or Stand-Alone
3U Height -- 4 Modules/Rack Cage -- Individually AC
Powered
| 800 |
Rack assembly |
19" subrack fully
wired for modules |
| 803 |
Stand-alone Quartz
oscillator |
5MHz or 10MHz versions)
803M variant, Ultra-low Drift & Phase noise. |
| 807C |
Frequency-Difference
Monitor |
(Centre-zero meter, ±1 in 10E9 full scale)
1MHz to 10MHz operating range, with 'difference-alarm' signal
output. |
| 808D |
Phase Comparator |
With 0 to +1V dc output.
For measurement of relative-phase between two frequency sources. |
| 809A |
5 output sinewave
distribution |
(+13dBm in 50ohm maximum output)
Unity gain; Variable gain version optional. |
| 810A |
5 output timing-pulse
distribution |
(TTL outputs; will drive 50ohm terminations)
RS422 differential-drive version optional. |
| 820A |
5 output sinewave
frequency-doubler |
(+13dBm in 50ohm maximum output)
5MHz to 10MHz only. |
| 824C / 825A |
Frequency control unit
for 803M |
Automatic drift-correction
against an external 1Hz or 10MHz reference. |
| 884A |
Auto Changeover |
Switches between Master
and Standby frequency sources. Automatic, manual or remote selection
of source |
| 894A |
Dial clock driver unit |
Will drive up to 15
Moser-Baer Clocks. Requires +24V dc external power supply. |
1880 series --
1886
Click here for
datasheet of 1866/1886/1876/1976 Series
Auto-changeover / Distribution Units allow duplex operation of two 1804s,
and in
addition provide up to 10 pairs of Timing and Frequency outputs.
Companion Unit To 1804 / 1814 / 2804 GPS Time & Frequency Sources
19" Rack-Mount x 1U Height
Provides
full-duplex Master/Standby operation with two sources.
Auto-changeover and Distribution with
10 Frequency and 10 Timing Outputs
Fault alarm output -- All inputs and
outputs monitored
1866, 1876, 1886 and
1896 Common Features
|
| General Packaging 1U x 19
inch rack mount |
| Alarm Contact Unit gives
indication of power, input or output faults. |
| Cables Interconnection
cables for power and input signal are available for order. |
|
Amplifier gain Input to loaded output voltage
gain 0 ± 1dB. |
Products available:
| 1866A |
Frequency and Timing
Changeover/Distribution Unit. Accepts 1 x Frequency (sine) and
1 x Timing input 50ohm, BNC and produces 10 + 10 x outputs 50ohm,
BNC. A.C. power with dc support. |
| 1866C |
Frequency
Changeover/Distribution Unit. Accepts 1 x Frequency (sine) input
50ohm, BNC and produces 14 x outputs 50ohm, BNC. A.C. power with dc
support. |
| 1886A |
Frequency and Timing
Changeover/Distribution Unit. Accepts 1 x Frequency (sine) and
1 x Timing input 50ohm, BNC and produces 10 + 10 x outputs 50ohm,
BNC. D.C. power (twin inputs). |
| 1886C |
Frequency
Changeover/Distribution Unit. Accepts 1 x Frequency (sine) input
50ohm, BNC and produces 14 x outputs 50ohm, BNC. A.C. power with dc
support. |
1876, 1896 -
DISTRIBUTION ONLY UNITS
Click here for
datasheet of 1866/1886/1876/1976 Series
| DC AND AC POWERED VARIANTS. |
| VARIANTS FOR FREQUENCY AND TIMECODE
DISTRIBUTION. |
| UP TO 14 OUTPUTS IN A 1U MODULE. |
MAY BE POWERED FROM DC OUTPUT ON GPS
SOURCE OR BACKUP BATTERY.
Products available:
| 1876A |
Frequency and Timing
Distribution Unit. Accepts 1 x Frequency (sine) and 1 x Timing input
50ohm, BNC and produces 10 + 10 x outputs 50ohm, BNC. A.C. power
with dc support. |
| 1876C |
Frequency Distribution
Unit. Accepts 1 x Frequency (sine) input 50ohm, BNC and produces 14
x outputs 50ohm, BNC. A.C. power with dc support. |
| 1896A |
Frequency and Timing
Distribution Unit. Accepts 1 x Frequency (sine) and 1 x Timing input
50ohm, BNC and produces 10 + 10 x outputs 50ohm, BNC. D.C. power
(twin inputs). |
| 1896C |
Frequency Distribution
Unit. Accepts 1 x Frequency (sine) input 50ohm, BNC and produces 14
x outputs 50ohm, BNC. A.C. power with dc support. |
| 1896D |
Timecode Distribution
Unit. Accepts 1 x Timecode input (BNC) and produces up to 14 x
outputs 50ohm, BNC. Timecodes supported include IRIG-A, IRIG-B, XR3,
or 2137. |
|
1976D |
G703.10 Frequency
Distribution unit. Accepts 1 x 2.048MHz Frequency (sine) input
50ohm, BNC and produces 24 x outputs 75ohm, BNC. A.C. power with dc
support.
|
900 series
Click here for
datasheet of 900 Series
Distribution amplifiers for local distribution of sinewave
reference frequency to multiple outputs, up to 30 per cabinet.
The 900 series is a range of high-reliability modules which are used to build
versatile frequency distribution systems. The use of linear Power Supplies,
enclosed module construction and co-axial cable for interconnections means that
the units have excellent noise, emissions and immunity characteristics.
Versions of the sub-rack are available for 19" rack, desk top or wall
mounting.
| UP TO 30 CHANNELS AVAILABLE FROM EACH
RACK. (CASCADEABLE) |
| ULTRA LOW NOISE AND EMC PROFILE. |
| FLEXIBLE CONFIGURATION AND MOUNTING
ARRANGEMENTS. |
| WIDE RANGE OF MODULES AVAILABLE. |
Rack-Mount -- 3u Height -- 7 Modules/Cage -- 1mhz To 10mhz Operation
| 900 Rack assembly |
19" subrack fully wired for
modules |
|
903A G703 DISTRIBUTION |
Sine or TTL input on SMA connector
6 outputs G703.10 compliant. BNC 75 ohm connector
|
| 908 Phase comparator |
Two channel |
| 909 Standard Sinewave Distribution |
up to +13dBm |
| 910 Input/Conditioning/Signal-split |
6 outputs |
| 911 Power Module |
ac input, dc outputs power a full cage |
|
912A TTL DISTRIBUTION |
Sine or TTL input on SMA connector
6 outputs TTL 50 ohm on BNC connector
|
| 916 Synthesiser |
VLF to 10MHz in 10
milliHz steps |
| 919 High level Sinewave Distribution |
up to +22.5dBm |
| 920 Frequency Doubler |
5 to 10MHz |
| 922 RS422
Distribution |
6 outputs BNO RS422 |
|
929A TIMECODE TO FIBRE |
RIG-A or B timecode input on SMA connector
Fibre Optic output on SM Opto connector
|
|
930A UNIVERSAL FIBRE TRANSCEIVER |
2x inputs of IRIG, Timecode, NMEA, Logic or Rapco Opto
2x outputs of logic and Opto on Fibre connectors
|
| 980 Auto Changeover |
Manual &
Remote control |
Battery Back-up Units
Compact battery Support Unit 1811, 1812 series
Battery back-up units to support reference sources in the event of temporary
power failure.
Rack-Mount x 1U Height -- NIMH Batteries -- Auto-Charger -- Easy
Battery-Pack Replacement.
| 1812B |
Short Term will support a GPS/Quartz
1804 |
for up to 1 hour |
| 1811B |
|
Medium Term 6 hours |
| 1811C |
|
Long Term >12 |
A range of Timecode Generators and Readers in 1U half-rack or full rack width
package. Supports all popular timecodes.
Timecode Generators
Click here for
datasheet of Timecode Generator Units
These microprocessor based units can be
configured to provide a wide range of standard and custom time code outputs at
low cost. The standard XR3 and IRIG codes are all fully supported and time may
be generated from the internal oscillator giving the units free standing
capability. However, for superior performance an external reference such as the
1804 or 2804 may be used.
| INTERNAL OSCILLATOR OR EXTERNAL
REFERENCE STANDARD. |
| MANY TIMECODES AND OPTIONS AVAILABLE. |
| HALF WIDTH VERSIONS PERMIT GENERATOR AND
READER TO BE MOUNTED AS A
SINGLE 1U RACK MODULE. |
A.C. POWERED. FULL RACK UNITS HAVE OPTION
OF INTERNAL BATTERY AND/OR EXTERNAL D.C. POWER INPUT.
19" Rack-Mount x 1U Height -- Side-By-Side Mount For ½ Rack Types -- AC
Powered.
343/344 -- Half-rack XR3 /
IRIG B (or IRIG A)
393/394 -- Full-Rack
XR3 / IRIG B (or IRIG A)
All of these popular Timecode units are still available to order.
For new systems requiring timecode generation consider also GPS sources [eg
1814] with integrated Timecode for a cost-effective solution.
Timecode Readers
Click here for
datasheet of Timecode Reader Units
These microprocessor based units can be
configured to read a wide range of standard and custom time code inputs at low
cost. The standard XR3 and IRIG codes are all fully supported and time may be
read in either direction at widely different speeds. In addition to the standard
RS232 Control port, models are available with IEEE-488 and high speed parallel
interface.
19" Rack-Mount x 1U Height -- Side-By-Side Mount For ½ Rack Types -- AC
Powered.
143/144 -- Half-rack XR3 /
IRIG B (or IRIG A)
193/194 -- Full-rack
XR3 / IRIG B (or IRIG A)
SERIAL
DATA CHANGEOVER UNIT -- ACU5M
| FULLY AUTOMATIC DETECTION OF DATA
FAILURE AND SWITCH OVER TO STANDBY SOURCE. |
| COMPACT 1U, A.C. POWERED CASE. |
| USES STANDARD 9 WAY CONNECTORS. |
This unit provides a convenient way to introduce the
security of a duplicated RS232 source into a system where such a facility
is needed. The changeover process is fully automatic with a front panel
indication of which source is currently in use.
SERIAL DATA DISTRIBUTION UNIT -- SDU10
| COMPACT 1U, A.C. POWERED CASE. |
| USES STANDARD 9 WAY CONNECTORS. |
| OPTICALLY ISOLATED OUTPUTS. |
The SDU10 is a 1U high x 19inch rack mount assembly that is intended
for use in situations where a serial ASCII message packet, broadcast from
a central source, must be connected to a number of remote equipments using
separate signal cables. It is a unidirectional, one-input / ten-output
buffer for handling RS232 level signals.
Rapco
SDU10/SDU22 -- Serial Data Distribution Units
| COMPACT 1U, A.C. POWERED CASE. |
| USES STANDARD 9 WAY CONNECTORS. |
| OPTICALLY ISOLATED OUTPUTS |
The SDU22 is a similar unit to
the SDU10 but having RS422 input and outputs.
TIME & FREQUENCY PERFORMANCE RECORDER--
TVMI4
| CONTINUOUS RECORDING OF PHASE DATA
RELATIVE TO REFERENCE SOURCE. |
| COMPACT 4U, A.C. POWERED CASE. |
| OPTIONAL SIMULTANEOUS TEMPERATURE
RECORDING CHANNEL. |
| LAN CONNECTION AVAILABLE. |
| OPTIONAL BUILT IN MSF REFERENCE
RECEIVER. |
| TIMESTAMPED DATA STORAGE CAPACITY UP TO
1 YEAR. |
| VISUAL COLOUR DISPLAY OF STORED DATA
WHILE CONTINUING TO RECORD. |
| PROGRAMMABLE ALARM OUTPUT. |
| FLOPPY DISK DATA STORAGE. |
This flexible unit provides
permanent records of Frequency system performance so that a traceability
route can be established. Such data can help to prove the integrity of the
use made of the system outputs. This might be to back up test results for
a Certificate of Compliance or to confirm usage time on a leased
communications link. Whatever the application, the TVM14 range can confirm
the trust placed in a working frequency source either by reference to
another trusted oscillator or to the MSF radio transmissions.
A range of LED displays of time in digital format driven from central
precision time source.
Display heights from up to 4".
Versions available for rack mounting, wall mounting, bench mounting, ceiling mounting.
| BRIGHT, EASILY READABLE DISPLAYS. |
| RACK AND WALL MOUNT VARIANTS |
| INTERNAL BACK UP CLOCKS |
| COMPACT DIMENSIONS FOR EASE OF
INTEGRATION.
|
| |
1405 |
419 |
420 |
421 |
440 |
|
Dimensions (excluding connectors) |
19"x1U x 95 mm |
19"x2U x 95 mm |
384x120x90 mm |
384x120x112 mm |
672x168x90 mm |
|
Digits |
9 x 1/2" |
9 x 1" |
6 x 2" |
6 x 2" |
6 x 4" |
|
Display Type |
Red LED |
Red LED |
Red LED |
Red LED |
Red LED |
|
Display formats generated |
ddd:hh:mm:ss
ddd:hh:mm
hh:mm:ss
hh:mm
|
ddd:hh:mm:ss
ddd:hh:mm
hh:mm:ss
hh:mm
|
hh:mm:ss
(Link selectable colon separators)
|
hh:mm:ss |
hh:mm:ss
(Link selectable colon separators)
|
|
Display brightness level variations |
8 |
8 |
1 |
4 |
1 |
|
Data Interface |
RS422 |
RS422 |
RS422 |
RS422 |
RS422 |
|
Voltage |
210-250V ac |
210-250V ac |
95-265V ac |
210-250V ac |
95-265V ac |
|
Power requirement |
|
|
15VA |
6VA |
20VA |
|
Alarm Indications |
Loss of data
Source alarm
|
Loss of data
Source alarm
|
None |
None |
None |
|
Internal back up clock |
Yes |
Yes |
No |
Yes |
No |
|
Daisy Chain (Units/Distance) |
10/>100m |
10/>100m |
|
10/>100m |
|
Remote Time-Display Units -- 1405 (½in), 419 (1in).
19" Rack-Mount x 1U Height (1405) / 2U Height (419)
High-Brightness
Led Digits -- AC Powered.
RS422 input from 1804, 1814, or
2804 sources.
IRIG Time-of-Year
display Day, Hr, Min, Sec
365:23:59:5
| 1405 |
0.5 inch
digits (9) |
| 419 |
1.0 inch
digits (9) |
| 420 |
2.0 inch
digits (6) |
| 421 |
2.0 inch
digits (6) |
| 440 |
4.0 inch
digits (6) |
Type 420/440 Display Unit and Clock
These displays are ruggedly engineered with moisture, dust and vibration protection far superior to most competing products. Attention to the visual quality and styling of the displays enhances any installation.
The use of a UV hardened, Anti-Glare coated polycarbonate lens avoids scratching and blurring whilst giving the display a solid, robust shield to the tough industrial world.
Stainless steel and UPVC parts resist discolouration and degradation in corrosive atmospheres, and ensure that the sealing will be maintained for many years.
Standard Features
Case colour black.
P65 sealing.
Adjustable brightness setting.
High impact case.
4mm. thick high impact polycarbonate lens.
High reliability LED
technology
Universal power range 95 - 265
VAC
Digit test sequence at switch-on.
Serial data input allows
daisychaining.
System-Alarm Indicator Unit -- 1870
19" Rack-Mount x 1U Height -- Provides Concentrated Alarm Display From
Multiple Sources.
24 x Contact/TTL alarm inputs.
Audible fault warning.
Current-state/Latch indicators for
all inputs.
Composite system-fault alarm output.
Model 1870C now includes a bi-directional RS232 interface for remote
interrogation of system status by external control and monitoring systems.
Rapco
Computer System Time Synchronisation Software
| DESIGNED FOR LAN TIME SYNCHRONISATION
APPLICATIONS |
| USES ANY RAPCO OR OTHER NMEA COMPLIANT
GPS SOURCE |
| EASILY INTEGRATED INTO EXISTING COMPUTER
SYSTEMS |
| CAN USE DIAL UP SERVICES AS TIME SOURCE |
| GOOD SYNCHRONISATION TO UTC AND CLIENT
TO CLIENT |
This software package is a fully featured NTP Time
Server with the capability to accept an NMEA compliant GPS Time Source as
its reference such as the Rapco 1804 models. A simple serial connection
between a spare port on the PC nominated to be the network time server and
the RS232 output on the GPS unit completes the hardware installation. On
receipt of a valid NMEA time message from the GPS unit, the software will
update the PC’s internal clock to the UTC content of the message
received. A user specified offset can be included to match the time in the
local time zone. The software then monitors the LAN ready to respond to
requests for time updates from network clients.
The second part of the system consists of a software module loaded onto
each network client required to be time synchronised. Each client may be
configured to raise a request to the time server for a time update on a
scheduled basis or simply at log in. Versions of the client module are
available for Windows 95, Windows 98 and Windows NT. On receipt of the
time message from the server, the internal clock of the client is adjusted
as required.
User licences for the system are available in single server, single client
and 20 client modules.
ACCESSORIES AND
SPARES
We design, build and commission complete Frequency Reference Systems
with Caesium, Rubidium or Quartz based reference sources, Distribution
Amplifiers, Phase Comparators, Frequency Difference Meters, Auto Changeover
Units, Battery Support Units etc.
Rapco Electronics can also offer comprehensive systems
engineering support to their clients. Projects may involve responsibility for a
Time & Frequency system on behalf of a client for whom it is not core
business or acting as support for a Prime Contractor/Integrator. In either case
Rapco can supply expertise and problem solving skills to ensure objectives and
deadlines are met.
We will customize any product, irrespective of quantity, to suit a specific
application and offer a solution
tailored to your requirements.
Working to ISO 9001 standards, The Company has extensive
archives of software and hardware designs which permit the manufacture of
highly customised products. Where an off the shelf solution does not exist,
the engineers thrive on the challenge of developing and testing a new design
to meet customers' requirements.
Rapco's policy is one of continual improvement. We therefore reserve
the right to make changes
to specifications without notice.
For further information please contact:
|
|
|
|
|
|
|
|
Alan
Turner Sales
Manager |
|
Postal address |
Rapco Electronics Ltd
Joule Road, Basingstoke, Hants, England. |
|
|
RG21 6XF |
|
Telephone |
+44 (0)1256 325 454 |
|
FAX |
+44 (0)1256 322 695 |
|
Electronic mail |
alanturner@rapco.co.uk |
|
|
